|
Article on other languages:
|
"Ultimax" redirects here. For the computer, see Commodore MAX Machine.
The Ultimax 100 is a Singaporean 5.56 mm light machine gun, developed by the Chartered Industries of Singapore – CIS (currently incorporated into the Singapore Technologies Engineering Ltd or ST Engineering group) by a team of engineers under the guidance of American firearms designer L. James Sullivan.[2] Work on a new light support weapon for the Singapore Army began in 1978.[2] The weapon is produced by CIS (presently STK – Singapore Technologies Kinetics), initially in the Mark 1 version, later – the Mark 2, and currently, only the Mark 3 (a Mark 4 variant is being evaluated). The Ultimax 100 (also called the U 100) is used in significant numbers by the armed forces of Singapore, Croatia and the Philippines. It holds the record of being the lightest light machine gun at 4.9 kgs.[3][4]
Design detailsThe Ultimax 100, also known as the "Section Machine Gun" is a gas-operated automatic weapon (capable of fully automatic fire only) with a short-stroke gas piston operating system powered by ignited powder gases diverted from the barrel through a port in the gas block. The Ultimax 100 is a locked breech weapon with a rotating bolt that contains 7 locking lugs. It fires from an open bolt position. The bolt contains both a spring extractor and a casing ejector. The weapon's non-reciprocating cocking handle is located on the left side of the receiver and occupies the forward position during firing. The Ultimax 100 is striker-fired. The feature that grants the weapon its low recoil (compared to similar light machine guns) is the "constant recoil" principle. The overall design allows the bolt carrier group to travel all the way back without ever impacting the rear, instead stopping gradually along the axis of movement against the resistance of the return springs.[5] The magazine catch consists of two tapered pins on a bar, controlled by the magazine release button. The machine gun feeds from a proprietary 100-round synthetic drum magazine (early models also used 60-round drum magazines), or from a modified 20 or 30-round STANAG 4179 magazine (from the M16 rifle). The Ultimax 100 uses a manual safety mechanism that consists of a lever installed on the left side of the receiver (just behind the trigger) with two possible settings: "S" – indicating the weapon is safe and "F" – continuous fire. An internal safety achieved through the proper arrangement of parts and mechanisms secures against premature detonation. The light machine gun was also designed to mount an M16-type bayonet and either day or night-time optics. VariantsThe Mark 1 version of the Ultimax 100 had a lightweight quick-change barrel (but due to issues arising during the removal procedure, this option was dropped), the Mark 2 – a heavy non-removable barrel and the Mark 3 – a heavy, quick-change barrel.[2] Currently the Mark 3 variant is also available in two different barrel lengths, a standard and short, para model, whereas the short barrel is designed for use with paratroopers and special forces. The barrel on all versions has a slotted flash suppressor and a carrying handle used to transport the weapon and assist in barrel removal. The Ultimax Mark 3 has a three-position gas regulator (early models had a 5-position gas adjustment valve) that allows the rate of fire to be controlled and enables reliable operation in various environmental conditions.[6][2] The gas regulator is usually pre-adjusted prior to operations. Where there is sluggish operation due to fouling, the gas setting may be increased by two clicks using the provided C-tool. The weapon features a standard pistol grip, a vertical forward grip integrated into the forend and a detachable buttstock. Thanks to the mild felt recoil acting upon the shooter, the weapon can be used effectively without the buttstock, using only the pistol and forward grips to support and aim the firearm. The adjustable bipod has a height adjustment mechanism and is secured to the weapon's forend, providing stability in a sustained-fire role. The bipod is quick-detachable and can be mounted or removed without the use of tools. The Ultimax 100 features an aperture type rear sight (with range settings for distances up to 1,200 m, graduated every 100 m) placed on a sliding scale and a forward vertical post housed in the front sight base and protected by two metal tabs. The weapon incorporates sheet metal stamping and the use of synthetic components in its design. The drum magazine, buttstock, pistol grip and forend with vertical grip are all made of a impact-resistant polymer.[7][4][6] The LMG is adapted to fire both the American 5.56x45mm M193 cartridge[7] (the weapon is then fitted with a barrel with 6 right-hand grooves and a 305 mm or 1:12 in twist rate) or the heavier Belgian SS109/M855 cartridge (in this case, the weapon is configured with a 178 mm or 1:7 in twist rate barrel with 6 right-hand grooves).[4] Standard accessories supplied with the weapon include: two magazines; a 100-round drum and 30-round box magazine, a spare barrel, sling, blank-firing adapter and a cleaning kit.[7][4] STK also developed a vehicle-mounted variant of the weapon. A new Mark 4 version is currently under development for the United States Marine Corps Infantry Automatic Rifle program,[2] with the addition of a new fire selector module and most likely a revised dual-drum C-Mag design, with a translucent Lexan backplate (for visual round observation).[7] Users
References
External links
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This article is from Wikipedia. All text is available under the terms of the GNU Free Documentation License.