List of discontinued Volkswagen Group diesel engines

These diesel engines listed below were formerly used by various marques of automobiles and commercial vehicles of the Volkswagen Group, but are now discontinued.

Since the Volkswagen Group is European, the engine performance ratings are published using the International System of Units (commonly abbreviated "SI"), a modern form of the metric system of figures. The engines will have been tested by a Deutsches Institut für Normung (DIN) accredited testing facility, to either the original 80/1269/EEC, or the later 1999/99/EC standards. These metric standards for motive power are quoted in either Pferdestärke (PS) (~= 735.5 watts (W), ~= 0.98632 hp (SAE) - sometimes incorrectly referred to as 'metric horsepower'), or kilowatts (kW). In case of conflict, the metric power figure will be stated in kilowatts (kW). For the turning force generated by the engine, the Newton metre (Nm) will be the reference figure of torque.

The diesel engines which Volkswagen Group currently use in todays vehicles can be found in the list of Volkswagen Group diesel engines article.

four cylinders diesels

Based on the 827 engine series with 88 mm cylinder spacing.

50 hp 1.5 D

engine code 

CK

configuration 

1471 cm³ inline 4, bore 76,5 × stroke 80 mm

head 

SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression

block 

cast iron, five bearings

output 

37 kW (50 hp) at 4400 rpm, 90 N•m (67 ft·lbf) at 2800 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf 8/76-7/80, VW Passat 8/76-7/80

54 hp 1.6 D

engine code 

CR

configuration 

1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression

fuel 

distributor injection pump, whirl chamber

output 

40.3 kW (54 hp) @ 4800 rpm, 100 Nm (74 ft·lbf) @ 2300 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf 8/80-7/82, VW Jetta 8/80-7/82, VW Passat 8/80-7/82, Audi 80 8/80-7/82

50 hp 1.6 D

engine code 

CS

configuration 

1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression

fuel 

distributor injection pump, whirl chamber

output 

37 kW (50 hp) @ 4200 rpm, 100 Nm (74 ft·lbf) @ 2500 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Type 2 1/81-7/87

70 hp 1.6 TurboDiesel

engine code 

CY

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, mechanical lifters, 23:1 compression

block 

cast iron, five bearings

output 

51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2600 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger

application 

VW Golf 8/81-7/84, VW Jetta 8/81-7/84, VW Passat 8/81-4/88, Audi 80 8/84-7/86, Audi 90 8/84-7/86

54 hp 1.6 D

engine code 

JK

configuration 

1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression

fuel 

distributor injection pump, whirl chamber

output 

40.3 kW (54 hp) @ 4800 rpm, 102 Nm (75 ft·lbf) @ 2000 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Polo , Audi A2 , Seat Ibiza.

54 hp 1.6 D

engine code 

JP

configuration 

1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression

fuel 

distributor injection pump, whirl chamber

output 

40.3 kW (54 hp) @ 4580 rpm, 100 Nm (74 ft·lbf) @ 2300 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf 8/83-10/91

70 hp 1.6 TurboDiesel

engine code 

JR

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression

block 

cast iron, five bearings

output 

51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2600 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger

application 

VW Golf 8/83-10/91

70 hp 1.6 TurboDiesel

engine code 

JX

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression

block 

cast iron, five bearings

output 

51 kW (70 hp) @ 4500 rpm, 138Nm (98 ft·lbf) @ 2500 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger

application 

VW Type 2 8/84-7/91, VW Type 2 syncro 8/85-7/92

79 hp 1.6 TurboDiesel

engine code

RA; SB

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression

block 

cast iron, five bearings

output 

59 kW (79 hp) @ 4500 rpm, 152 N·m (112 lb·ft) @ 2200 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger, intercooler

application 

VW Golf II 1989-1991, VW Passat B3 1988-1993

57 hp 1.7 D

engine code 

KY

configuration 

1715 cm³ inline 4, bore 79,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

fuel 

distributor injection pump, whirl chamber

output 

42 kW (57 hp) @ 4500 rpm, 103 Nm (76 ft·lbf) @ 2800 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Type 2 10/86-5/92

54 hp 1.6 D

engine code 

ME

configuration 

1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

fuel 

distributor injection pump, whirl chamber, altitude corrector

output 

40.3 kW (54 hp) @ 4800 rpm, 96 Nm (70 ft·lbf) @ 2500 rpm

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf 5/88-10/91, VW Caddy 8/90-7/92

70 hp 1.6 TurboDiesel

engine code 

MF

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

block 

cast iron, five bearings

output 

51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2500 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger

application 

VW Golf 5/88-10/91

45 hp 1.3 D

engine code 

MN

configuration 

inline 4, bore 75 × stroke

block 

cast iron, five bearings

head 

SOHC 2-valve per cylinder, mechanic lifters

fuel 

distributor injection pump, whirl chamber

output 

33 kW (45 hp)

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Polo 6/86-7/90

80 hp 1.6 TurboDiesel

engine code 

RA

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

block 

cast iron, five bearings

output 

59 kW (80 hp) @ 4500 rpm, 155Nm ( ft·lbf) @ 2800 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger (water cooled), intercooler

application 

Audi 80 4/88-7/89, Audi 90 4/88-7/89, VW Passat 8/88-7/89, VW Golf 4/88-2/90

80 hp 1.6 TurboDiesel

engine code 

SB

configuration 

1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

block 

cast iron, five bearings

output 

59 kW (80 hp) @ 4500 rpm, 155Nm ( ft·lbf) @ 2500 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbocharger (water cooled), intercooler

application 

Audi 80 4/89-10/91, Audi 90 4/89-10/91, VW Passat 8/89-7/93, VW Golf 10/89-10/91

64 hp 1.9 D

configuration 

1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, five bearings

output 

47 kW (64 hp) at 4400 rpm, 124 N•m (92 ft·lbf) at 2000 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf

60 hp 1.7 SDI

engine code

AKU

configuration 

1715 cm³ inline 4, bore 79,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, 19.5:1 compression

block 

cast iron, five bearings

output 

44 kW (60 hp) at 4200 rpm, 115 N•m (85 ft·lbf) at 2200 rpm

fuel 

distributor injection pump, direct injection

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Lupo, VW Polo

64 hp 1.9 SDI

configuration 

1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, five bearings

output 

47 kW (64 hp) at 4200 rpm, 124 N•m (92 ft·lbf) at 2200 rpm

fuel 

distributor injection pump, direct injection

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW Golf

68-75 hp 1.9 TD

engine code 

AAZ

configuration 

1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, five bearings

output 

55 kW (75 hp) at 4200 rpm, 150 N•m (111 ft·lbf) at 2000 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

turbo charger

application 

VW Golf,VW T4,VW Passat,Audi 80

90 hp 1.9 TDI

engine code

AGR

configuration 

1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 19.5:1 compression

block 

cast iron, five bearings

output 

66 kW (90 hp) at 3750 rpm, 210 N•m (155 ft·lbf) at 1900 rpm

fuel 

distributor injection pump, direct injection

aspiration 

turbo charger with intercooler

application 

VW Golf

110 hp 1.9 TDI

engine code

AFN; AVG; AHF; ASV

configuration 

1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 19.5:1 compression

block 

cast iron, five bearings

output 

81 kW (110 hp) at 4150 rpm, 235 N•m (174 ft·lbf) at 1900 rpm

fuel 

distributor injection pump, direct injection

aspiration 

turbo charger with intercooler

application 

VW Golf, VW Vento, VW Bora, VW Passat, VW Sharan, Seat Ibiza, SEAT Córdoba, Seat Leon, SEAT Toledo, SEAT Alhambra, Audi A3, Audi A4, Audi A6, Skoda Octavia, Ford Galaxy

five cylinders diesels

70 hp 2.0 D

engine code 

CN

configuration 

inline 5, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, six bearings

output 

51 kW (70 hp) at 4400 rpm, 140 N•m (102 ft·lbf) at 2800 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

Audi 100 10/78-7/89

90 hp 2.0 TD

engine code 

DE

configuration 

inline 5, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, mechanical lifters, 23:1 compression

block 

cast iron, six bearings

output 

66 kW (90 hp)

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold, turbocharger

application 

Audi 100 7/81-12/87

102 hp 2.0 TD

engine code 

NC

configuration 

inline 5, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, hydro lifters, 23:1 compression

block 

cast iron, six bearings

output 

75 kW (102 hp)

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold, turbocharger, intercooler

application 

Audi 100 3/88-12/90

71-82 hp 2.4 D

configuration 

2370 cm³ inline 5, bore 79,5 × stroke 95,5 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, seven bearings

output 

60 kW (82 hp) at 4200 rpm, 160 N•m (118 ft·lbf) at 2200 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

Audi 100,VW T4

six cylinders diesels

Further information: Volkswagen D24 engine and Volkswagen D24TIC engine

75 hp 2.4 D24

configuration 

2383 cm³ inline 6, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, seven bearings

output 

55 kW (75 hp) at 4000 rpm, 155 N•m (115 ft·lbf) at 2800 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW LT, Volvo 740

90-115 hp 2.4 D24

configuration 

2383 cm³ inline 6, bore 76,5 × stroke 86,4 mm

head 

SOHC 2-valve per cylinder, 22:1 compression

block 

cast iron, five bearings

output 

70 kW (95 hp) at 4000 rpm, 220 N•m (161 ft·lbf) at 2000 rpm

fuel 

distributor injection pump, whirl chamber

aspiration 

cast aluminum intake manifold, cast iron exhaust manifold

application 

VW LT, Volvo 760

References

• Volkswagen engine codes
• Audi engine codes

See also

• List of Volkswagen Group petrol engines
• List of Volkswagen Group diesel engines
• List of discontinued Volkswagen Group petrol engines
• Turbocharged Direct Injection (TDI)
• Suction Diesel Injection (SDI)
• BlueMotion
• List of Volkswagen Group platforms

External links

• Volkswagen Group corporate website